YBJ Series Three-phase Asynchronous Motor

YBJ Series Three-phase Asynchronous Motor Introduction

YBJ Series Three-phase Asynchronous Motor is special for the coal mine dispatching winch motor.This series of explosion-proof performance conforms to the motor standard by GB3836.2－2000.

YBJ Series Three-phase Asynchronous Motor Parameters

1.Voltage rating:380V.660V.380/660V.660/1140V
2.Rated frequency:50Hz
3.Protection grade :IP55
4.Cooling way :IC411
5.Work system :S1
6.Insulation grade:F
7.Installing form :IMB3.IMB5.IMB35.IMB9001

YBB Series Three-phase Asynchronous Motor

YBB Series Three-phase Asynchronous Motor Introduction

YBB Series scraping loader use for flame-proof type Three-phase Asynchronous Motor suitable for the coal mine planetary transmission scraper mucker matching motor. YBI series scraping loader use for flame-proof type Three-phase Asynchronous Motor be use for coal mine lateral unloading rock loader motor.The two series of explosion-proof motor performance standard by GB3836.1-2000.

YBB Series Three-phase Asynchronous Motor Parameter

1.Voltage rating:380V.380/660V.660/1140V
2.Rated frequency:50Hz
3.Protection grade :IP55
4.Cooling way:IC411(YBB).IC410(YBI)
5.Work system :S1(YBB).S3(YBI)
6.Insulation grade:F
7.Installing form :IMB3.IMB5.IMB35etc.

YB2D Series Pole-changing Multi-speed Three-phase Asynchronous

YB2D Series Pole-changing Multi-speed Three-phase Asynchronous Motor Introduction

YB2D Series Pole-changing Multi-speed Three-phase Asynchronous Motor be use to underground coal mine (not tunnelling face)and Factory with the job sites with explosive air mixture for electricity use.motor with variable speed change pole. YDSeries Pole-changing Multi-speed Three-phase Asynchronous Motor be use to the factory has no the sites with explosive air mixture. YDT series motor be use to coal mine.metallurgical .textweave.chemical industry .light industry and civilian facilities should be according to the season,air conditioning fan air volume and water pump flow.

YB2D Series Pole-changing Multi-speed Three-phase Asynchronous Motor Parameter

1.Voltage rating:380V.380/660V.1140V
2.Rated frequency:50Hz
3.Protection grade :IP55
4.Cooling way :IC411
5.Work system :S1
6.Insulation grade:F
7.Installing form :IMB3.IMB5.IMB35 etc

DSB Series Flame-proof Three-phase Asynchronous Motor

DSB Series Flame-proof Three-phase Asynchronous Motor Introduction

DSB Series Flame-proof Three-phase Asynchronous Motor be use to coal mine scraper conveyor and belt conveyor.This series of explosion-proof performance conforms to the motor GB3836.1-2000.

DSB Series Flame-proof Three-phase Asynchronous Motor Parameter

1.Voltage rating:380V.660V.380/660V.660/1140V

2.Rated frequency:50Hz

3.Protection grade:IP55

4.Cooling way :IC411

5.Work system :S1

6.Insulation grade:F

7.Installing form:IMB3.IMB5.IMB9001

DC Electric Mini Motor for Electric Toy Car

DC Electric Mini Motor for Electric Toy Car

Product Introduction

DC Brush Motor Designed for high volume applications Up to 10230 g-cm of Torque52 mm diameter Custom versions are available Rated Power: 8.8 to 254.9 (W)Rated voltage: 3.0 ~ 36.0 (V)Rated current: Can be determined according to the requirements of (A)Rated speed: 1000 to 25000 (rpm)Rated Torque: Available upon request to determine (NM)Dimensions: Outer diameter 42.2X66.0 long X-axis of the outer diameter of 5mm (mm)Product Certification: RoHS, Reach, ULScope: Cordless power tools; Model travel, household appliances and other efficiency: 30 to 85 (%)

Floor jack

Usage


Floor jack is mainly used for factory mines, transportation and other departments as vehicle repair and other lifting, supporting tool.


Product Introduction


Floor jack with rigid top piece as a working device, through the top bracket or bottom claws jack the goods in a small stroke area,is a small light weight lifting equipment.


Floor jack is mainly powered by human, large lifting capactiy, lifting height is no more than 400 mm, widely used in equipment maintenance and installation.


Techincal Parameter


Model lifting capacity Lowest height Top height Packing size
QK2 2TON 135MM 350MM 45×21×15CM
QK3 3TON 135MM 500MM 71×41×21CM
QK4 4TON 135MM 500MM  73×41×21CM
QK5 5TON 140MM 560MM  81×39×25CM
QK8 8TON 180MM 580MM 154×42×27CM
QK10 10TON 180MM 580MM  166×52×32CM
QK20 20TON 200MM 580MM 166×52×38CM

Vertical hydraulic jacks

Product Introduction

This product is designed with safety holding pressure device to prevent sudden overpressure, special structure for jack play multiple protective effect, can bear negative Heda partial load carrying capacity of the hydraulic cylinder rated at 5%, high degree of durable alloy cylinder, particularly in large engineering species, is easy to operate controls.

Separated hydraulic jacks

Separated hydraulic jacks

Feature


FQY type separated hydraulic jack with big output power, light weight, space can be at any position on the remote operation feature, together with the high pressure pump station, enabling the top, pushing, pulling, squeezing, pressure and other forms of job .


Usage


Widely used in transportation, railway (subway), bridges, shipbuilding, construction, factories, mines and other industries. In recent years also been used in foundation settlement and static pile test has been widely used.

Pneumatic hydraulic jacks

Pneumatic hydraulic jacks

Feature


Pneumatic jack with safety protection agency, assuming all the peripheral gas, oil cut, jack will not fall. Maintenance costs are very low, normal 50 tons jack per year to replace 2-3 sets and so far most of the pneumatic jack has been used more than four years without any maintenance. Pneumatic jack normal maintenance just replace the seals part.


Pneumatic jack is suit for heavy lifting, with overload protection valve, hard chrome plated piston rods to ensure a long service life, real-time control manually, down safely.

Screw jack

Product Introduction

Screw jack is powered by human through screw pair drive, screw rod or nut sleeve as the jacking parts. Common screw jack rely on screw self-locking effect by supporting weight, simple structure, but the transmission efficiency is low, return slowly.Lower screw jack without self-locking effect, equipped with brakes.Relax brakes, can be self-rapid decline in weight, shorten turnaround times, but this jack more complex structures. Jackscrew long-term support heavy loads, max weight reached 100 tons, used widely. After the bottom is mounted horizontal screw rod,the machine can make the weight for the small distance traversed.


Usage


As a common lifting and jacking tool on automotive, bridges, ships and machinery industries. Hook screw jack can hook lower position goods using hooking leg.

600 Offset scale

600 Offset scale Brief Introduction

Offset scale advantages: simple structure, easy to install, production characteristics of stainless steel scale biggest as above profile with feet body is fixed, high precision, durable, mill scale is not easy to change.
Railway offset scale consists ruler, scale ruler and ruler amusement box body composition, foot-shaped profile as a duplex structure, was square tube-shaped, with the outer edge of the top and bottom of the profile extends outwardly opened a notch in the outer edge of the inner , to be inserted in the gauge stainless notch, and then ends with a pin in its fixed frame ruler middle with swim, swim deputy ruler fixed on the frame, side, side adjustment bolt is fixed, ruler and ends with vane probe, the entire support from the foot was T-shaped structure.

Track gauge detector

Track gauge detector Product Introduction

Track gauge detector,ATGJ-1The railway track gauge detector is used for verification of the standard gauge railway track special fixture.This test can be used for 0, 1 and 2-foot gauge the initial verification, repeat testing (periodic testing).
The function of the track gauge detector is introduced: the detector part is measured by the gauge and level (high) measurement of parts.


Gauge measuring part is through the activity, fixed measuring block to benchmark the length of the gauge for 1435 mm gauge point, by adjusting the handwheel adjustment can achieve 1410 mm to 1410 mm, the adjustment of the gauge rod in the corresponding position can be clearly read, locking location using gauge the lock screw of the scale.  
Ultra-high measurement adopts gear and chain hoist, operation after pull the hand wheel rotation handwheel, can adjust the ultrahigh relative position measurement. Adjust to the lowest point for zero level, high measuring block adjustment the itinerary of 0 mm to 185 mm. Adjustment of corresponding position can be clearly read, in the ultrahigh scale lock position using ultra high scale of locking screw.
The track gauge detector body is made of imported guide rail to ensure the relative accuracy moving process, all the test block and structural parts adopt high quality materials with precision CNC machining center processing production, ensure that the overall assembly accuracy and long-term stability of the detector is used.


Track gauge detector Parameters


• accuracy level: level I
• gauge measuring range (1410 ~ 1470) mm
•Level (ultra) measurement range (0 ~ 185) mm
•ultra-high: of error of plus or minus 0.06 mm；
•working gauge length: 1435 + / - 0.20 mm
•gauge: of error of zero (1435) maximum permissible error of + / - 0.04 mm, not zero maximum permissible error of plus or minus 0.06 mm；

KD3-5 Hand-cranking span top/mechanical jack

KD3-5 Hand-cranking span top/mechanical jack Brief Introduction

Hand-cranking span top/mechanical jack is the way of manual lifting tool, can in a variety of projects and equipped with lifting JiangSheng as roof is hand force through the gears, drive the lifting or falling. When unloading heavy or down, left to move the ratchet will crank reverse rotation, manual control its speed, so as to better apply to the factory, warehouse, dock, railway, construction stack, etc, especially suitable for mobile installation of various machinery and equipment, locomotive maintenance, weight lifting, etc., the product design is reasonable, easy operation, flexible and reliable, to improve the work efficiency, reduce labor intensity play a good role.


KD3-5 Hand-cranking span top/mechanical jack Operation Method


1、according to the weight of gravity collapse given the placement of choice, will not tip over when lifting；
2、lifting and landing must be destroyed board or full collapse of the foot area in contact with the weight in order to ensure sufficient strength to prevent falling weight；
3、place destroyed the top floor should be solid, such as the ground is soft, should be added under the base pads, destroyed the top of the center position on the pad；
4、Shake before use empty once, from low to high, check for stuck or anomalies, everything is normal to use.


KD3-5 Hand-cranking span top/mechanical jack Announcements


1.Before use must know the weight, the use of the track jack, it is strictly prohibited to overload, lest cause the equipment damage accidents；
2. If the weight more than rated lifting weight, need more than one top carrying operation at the same time, keep more uniform top load carrying, up and down speed is consistent, stable；
3、 when the heavy lifting, if not unloaded in a short time, you must fill plus with heavy weights below ground clearance equal to the auxiliary pad as support.


KD3-5 Hand-cranking span top/mechanical jack Parameters.


rated maximum top weight （T）5
Rated maximum carrying weight（T）3
max. lifting height （mm）200
Span top max top position（mm）60
Span top the lowest position （mm）260
Span top the lowest position（mm）520
Top Class top position（mm）720

BK20 rock drilling tool

BK20 rock drilling tool Product Introduction

BK20 rock drilling tool with safety explosion-proof, torque, light weight, small size, high efficiency, simple structure, easy maintenance and a series of features. It can meet the coal mine air pressure fluctuation is large stable output speed requirements, can be used for U-shaped steel bracket and tighten the nut and bolt bracket removal, mixing resin bolt nuts and other mechanical and electrical equipment assembly and disassembly, can U-shaped steel bracket and bolt to improve stent performance, supporting quality assurance. The series gas trigger can be widely used in automobile, shipbuilding, petrochemical, locomotives, construction and other industries.

YQA type steel rail open machine

YQA type steel rail open machine widely used in mining, railway departments of track-laying and orbital reconstruction and repair.
YQA type steel rail open machine is composed of hydraulic manual pump and high pressure oil pipe, tubing connectors, openings for the main body of connection.When used according to the technical parameters of chosen suitable open hole pattern, the male die is installed on the piston rod, female die is installed on the hexagonal screw, with Allen wrench and tighten the piston rod and M8 cone on the hexagonal screw tight set screw.After the fixed mold can be according to the following procedures：
Openings for body set on the opening of the rail need, according to the rail connecting plate on the pitch, combined with openings for the main body of the scale of adjust after opening position, screw rod at the bottom of the hexagonal screw to rail by the opening of cavity die by positioning. Tighten the hand pump valve, spiral let go move deflated plug on the fuel tank, press to move the pump handle, when they hear clear cut Kong Sheng, hole had been open. Let go of the spin pump valve, oil cylinder piston rod drives the male mold to reply to the in situ, at the same time the scale at the bottom of the hexagonal screw reverse unscrew the cavity die away from the rail. When need to open the second hole as long as the amount of well hole and the hole center distance, according to the operating procedures to continue on the first hole.

Lifting magnet crane AYC2

Product Introduction


This product uses high-performance magnetic materials, big suction, small size, light weight, safe and convenient operation, no power, energy conservation is an ideal spreader suitable for shipbuilding, engineering machinery, automobile and other industries normal steel lifting and handling.


Feature


This product is unique internal magnetic circuit design, small remanence, long life, high safety factor. Underside using 'V' shaped groove design, lifting the corresponding bar or bar, no power, magnetic long-lasting, safe, lifting without gripping tool that does not damage the surface of the object to be lifting, greatly reducing the lifting operations time and improve production efficiency.

Turnbuckle

Usage


Widely used in various construction hoisting machinery, metallurgical and mining equipment, port rail handling, forestry machinery, electrical equipment, air and sea, land transportation, factories and mines lifting, hosting and towing industries.


Requirement


Magnetic: according to customer requirements.


Standard deviation: ± 0.05mm [This tolerance standard for the national industry standard, if any specific requirements, please contact with us.

Hook type pulley

Usage


Used for lifting heavy objects is a simple to use, easy to carry, lifting capacity greater. Generally supporting use with the winch, widely used in engineering, construction, infrastructure installation, factories, mines, transportation, and forestry.

Pulley

Product Introduction


Lifting pulley is an important tool for lifting ,simple structure, easy to use, able to change the pulling direction of pulley and block group and lifting or moving operation goods, especially by the coalition pulley block with winches , mast or other lifting machinery.


Usage


Widely used in the construction and installation operations. Product specifications from 0.03-320T, round pick from a single round to ten round, hanging with a hook, chain ring, rings, hanging rings and beams for choose.

Pallet fork

Pallet Fork Introduction

1.Pallet fork is equivalent of mechanical hand mounted on a forklift, that become a versatile and efficient material handling tools, capable of handling almost any conceivable object fork, tongs, push, pull, side shift and rotate operations, thereby improving logistics efficiency, reduce production costs and avoid product damage and saving storage space.Widely used in warehousing, paper, packaging, printing, tobacco, household appliances, wine and beverages, wool textile, ports, railway, automobile manufacturing, steel smelting, chemical and construction industries.　　

2.Can according to customer requirement, providing a variety of special specifications fork. 　　


3.In addition to ordinary hook type fork, it can also provide dynamic load forks, explosion fork, fork-shaped hood, folding forks, sleeve type fork, fork extension, drum cartridge type fork, wooden with goods fork, square fork, forks and other special profiling fork.

Leaky cable

Leaky cable product instruction

Leaky cable is usually referred to as the leak sensor cable and is a kind of outdoor perimeter intrusion detection system, mainly used in banking, treasury, senior housing, prisons, warehouses, museums, power plants (including nuclear), military agencies and facilities, bases, oil , heritage and other outdoor perimeter protection alarm requires place, can also be used as a variety of indoor protection alarm.

Leaky cable product feature


1.the three-dimensional boundaries to prevent significant regional coverage, can be achieved without dead guard. 　　


2.Easy installation suitable for complex terrain installation, surround the realm of arbitrary shape region, leak sensor cable section can buried in the ground or into the wall. 　　


3.With anti-false alarm feature can be a small pet animals such as dogs, cats and other interference in the zone moves filtered to eliminate the false negatives, false positives and other phenomena. 　　


4.Perfect adaptability is not affected by environmental temperature, humidity, wind and rain of smoke, such as trees shaking changes. 　　


5.Meticulous and broad four gears sensitivity adjustable sensitivity adjustment function, alarm threshold can be based on environmental change any Settings

Mine cable hook

Mine cable hook product instruction

Articulated cable hook can be used instead of steel cable hook and the corresponding support for the mine, run cables on the ground, especially for underground cable erection.

Mine cable hook capability and advantage


1.can according to set up the root of the cable for ease of use, when erect, remove and replace to save time, save work, and effort. It is now mine set up cable is ideal when erecting cable accessories.


2.antistatic, resistance to breakage and bending strength properties, not easy to aging, light weight, corrosion resistance, and low cost.


3. simple structure, easy to use, safe and reliable cable hook structure: 1.hanging hole 2, paragraph 3 Straight, curved 4, hanging rod 5, insurance deduction 6, reflective signs Cable hook parameters: hole diameter 17 (mm) Dimensions 150 * 65 (mm) Weight 100 g (t)

LBD Mobile cable reel

LBD Mobile cable reel introduction


Cable reel is one that can wound wire and cable reels, cable reel above with GB or industrial socket outlets, leakage protection and power indicator, as outdoor power, in order to facilitate movement and carry, small cable tray cable tray should bracket and handle, a large number of cable trays with casters. Mobile cable reel widely used in steel smelting, petrochemical, electric power, electronics, railways, construction sites, airports, mines, mining plant, water treatment plants and port terminals, shopping malls, hotels and other types of industrial and mining equipment as the introduction of this product light weight, easy to move, good material, socket performance, suitable for a wide range of available multi-purpose plug, should wide range of features.


LBDMobile cable reel technical parameter


voltage 380V


current ≤63A


frequency 50HZ

High voltage cable connector

High voltage cable connector product introduction

Mining explosion-proof cable connector is used in the excavation roadway of mine to link 1140 V -10kV power cable circuit and for wiring of cables with UGSP monitoring and shielding for power supply in the mobile substation. It can connect the both ends of the cable segment for the purpose of mutual cut-in ,or its half explosion-proof part can be connected to the mobile substation.

High voltage cable connector features

1．the connector is composed of two actually same parts with the public usage conducting rod and every part includes cable entrance system, wiring holder and insulator;
2． the clamp that used to prevent cable pulling –out is designed casting with bow gouge , this improve the reliability of fastening line;
3．insulator is made of by the good quality insulation material (DMC);
4． the connection between the insulator and the case adopts inner fixation to avoid the connection with outside.

High voltage cable connector maintenance


1.use and maintenance process, should prevent flame-proof collision or rust.


2.connectors are strictly prohibited in the process of maintenance of charged operation, must ensure that no residual voltage after power off when Fang Keba on or remove any part, residual charge except in accordance with the rules of coal security with reliable means of discharge, can also use mobile power station attenuation discharge The operating sequence is as follows:


2.1.general load switch to keep closing before operation, opening and "switch off" sign or high voltage switch to lock, and then operated the connector, if you have the low voltage feedback may be should be open feeding switch and load switch.


2.2. if the high voltage switch load switch has broken, in the open before the high voltage switch to sign or after locking, load switch is closed for at least one minute, first (via Shanghai machine tests showed that the general can be set within a second safety voltage) make drain the residual voltage in order to ensure safety, and the necessary operation.


2.3.replace the plug must finish line after the line transmission.


2.4.the flange of the middle connector shell will unplug after a period of time as required in the application letter lid is good, still use sealing gasket sealing, to prevent moisture intrusion.

Data Fiber Optic Cable

Data Fiber Optic Cable Product Brief Introduction

Data cable using Φ600μm retardant tight buffer fiber as the optical transmission medium, the use of stainless steel hose to enhance the anti-torsion cable, covered with a layer of Kevlar as a force to enhance unit, the outermost layer of extruded halogen materials (LSZH, low smoke, halogen-free, flame-retardant) jacket made.

Data Fiber Optic Cable Introduction


Our new product data cable, facing customers who need for high bandwidth and resistance to bending multimode fiber 　　


OM4 standard requirements are same as OM3 basic, only the bandwidth index change. In multimode system using the dominant wavelength of 850 nm, effective mode bandwidth (EMB) and traditional laser performance into full bandwidth (OFL) compared with OM3 requirements are improved.　　


Bandwidth　(MHz.km)　　　　OM3 requirements　　  OM4 requirements　　　


850nm high performance EMB　　     2000　　　　4700 　　


850nm traditional performance OFL　　  1500　　　　3500 　　


1300nm traditional performance OFL　　 500　　　　 500

NT6103 - J type stationary multi-channel radiation monitor

Product Introduction

NT6103 - J type stationary multi-channel radiation monitor is a practical multi-channel radiation detection equipment.
Data processing instrument adopts high speed microprocessors, highlight LED display with large size, has a super threshold sound and light alarm function. With a signal input and output function, can be connected to the interlock. Instrument can be used fixed in radioactive workplace, can also according to the need to move into a temporary surveillance area. Instrument USES switch power supply, can also be equipped with battery power supply, instrument can be used as portable X-ray detector.
It is environmental laboratory, irradiation chamber, nuclear medicine and molecular biology, radiochemistry and nuclear materials storage areas such as gamma and X-ray radiation dose rate test of the ideal instrument.

Functional features
1.can connect one to four road detector, detector with display.
2.dose rate exceeds the threshold alarm function, and also optional alarm detector
3.LED the highlighted measurements and working condition
4. automatic switching range and display unit
5.alarm threshold can be set manually
6. detector failure indication
7.host built-in light alarm function, and can be an external high decibels sound and light alarm
8. can be wall-mounted or desktop installation
9.two input signals
10. two output signals
11.two way alarm output signal
12.detector and host communications furthest distance of up to 1000 meters
13. NT6103 - J host built-in efficient GM tube detector

Technical indicators

1. measuring range: 0.01 ~ 5000 uSv/h
2. agent sensors: thin wall type of GM counter
3. energy range: 40 kev ~ 3 mev
4. acuity: p 3000 CPM/mR/h
5. relative error: 15% or less
6.power supply: DC 7 v ~ 24 v (standard 12 v switching power supply)
7.temperature range: - 10 ℃ to 50 ℃
8. humidity range: relative humidity of 95% or less (40 ℃)
9. host size weight: 0.5 kg; 160 * 85 * 35 mm
10. detector size weight: 0.3 kg (100 * 70 * 27 mm

The configuration list

1.NT6103 - J host, 12 v power supply, external sound and light alarm, connecting cable (with 10 meters)
2. probe (quantity according to customer requirements)
3.instruction manual, warranty card, certificate of approval

NT6103A radiation place monitor，Radiation area monitor

Product Introduction

Type NT6103A radiation place monitor is a type of economy is multi-purpose ray detecting instrument. Instruments built a radiation detector, high sensitivity adopted high-speed microprocessors for data processing, LED display is clearly visible, with super threshold sound and light alarm function.

Instrument can be used fixed in radioactive workplace, can also according to the need to move into a temporary surveillance area. Instrument USES switch power supply, can also be equipped with battery power supply, instrument can be used as portable X-ray detector.

It is environmental laboratory, irradiation chamber, nuclear medicine and molecular biology, radiochemistry and nuclear materials storage areas such as gamma and X-ray radiation dose rate test of the ideal instrument. NT6103A model for external detector, detector and host range up to 1000 meters.

Functional features

1.efficient GM tube detector

2. indicates a radioactive intensity of sound frequency

3. dose rate exceeds the threshold alarm function

4. ultra low power design

5.leds is highlighted

6. units show mu Sv/h, mR/h

7.exceeds the threshold alarm

8.alarm threshold can be set manually

9. jam alarm

10. detector failure indication

11. external sound and light alarm device

12. wall-mounted installation

Technical indicators

1.measuring range: 0.01 ~ 5000 uSv/h, 0.01 ~ 500 Mr/h

2. agent sensors: thin wall type of GM counter

3.energy range: 40 kev ~ 3 mev

4. acuity: p 3000 CPM/mR/h

5. relative error: 15% or less

6. power supply: DC 7 v ~ 24 v (standard 12 v switching power supply)

7. temperature range: - 10 ℃ to 50 ℃

8. humidity range: relative humidity of 95% or less (40 ℃)

9.host size weight: 0.5 kg; 160 * 110 * 35 mm

The configuration list

10. NT6103 type configuration: instruments, sound and light alarm, switch power, certification, warranty CARDS, manuals

11. NT6103A type configuration: host, detector, sound and light alarm, 10 meters connecting cable, switch power, certification, warranty CARDS, manuals

NT6102 X-γ dosimeter-radiometer

Purpose of use

Measurement of personal gamma and X-ray radiation equivalent dose rate(EDR)
Measurement of personal gamma and X-ray radiation equivalent dose(ED)
Alarm of exceeded programmed threshold levels

Application

Nuclear facilities around environmental radiation detection
The soil surface radiation pollution detection
Agricultural radiation pollution detection
Ore, building materials radioactive detection
Personal dose monitoring alarm
Industrial X, gamma NDT radiation detection
Radiation medical treatment place radiation detection
Cobalt source, electronic accelerator irradiation place radiation detection
Radioactive radiation laboratory detection

Specification

 Types of measured Ray: X, γ and hard-β rays
 Measurement range:
Radiation equivalent dose rate(EDR): 0.01 µSv/h - 10000µSv/h
Radiation equivalent dose(ED):
0.00 µSv - 9999Sv
 Energy ranges of measurement:
40KeV - 3.0MeV
 Relative errors of energy dependence(137Cs): ≤±25%
 Basic relative errors::
 ≤±15%
 Adjustable range of alarm threshold level relative to radiation dose rate: adjustable within the range
 Adjust able range of alarm threshold level relative to radiation dose: adjustable within the full range
 Response time of alarm: ≤5seconds
 Display unit:
EDR :(µSv/h、mSv/h、Sv/h )
Count Rate:cpm
    ED:(µSv、mSV、Sv)  
 Power: one AAA battery
 Dimension: 105*55*26 (mm)
 Weight: 80g (excluding battery)

NT6101 х-ray,gamma-ray radiation meter

Feature

High sensitivity, wide measuring range, good energy response
High-speed low power consumption microprocessor
Digital and gauge double display
Chinese interface display
LCD digital display
800 group data can be saved
Dose rate and total doses can be measured
Alarm function (alarm function /choke/Detector failure)
Battery Indicator
Solid stainless steel shell

Technical data

Detector：φ30×25mm，NaI
Sensibility：1µSv/h≥350CPS
Energy threshold value：35Kev
Measuring range:
Dose rate：0.01～500.00µSv/h
Accumulative dose:0.00µSv～99999µSv
Energy range：40Kev～3Mev
Energy response：≤±30%（relative to137Cs）
Relative error：≤±10%
Measurement time：1~120 adjustable
Alarm threshold：0.25、2.5、10、20、60（µSv/h）
Display：
Dose rate ：µSv/h、µGy/h、µR/h(selectable)
Accumulative dose：µSv
Counting rate： CPS
Power source：1#battery(Two batteries)
Power：≤120mW（not contains backlighting power consumption）
Weight:1.80Kg(contain battery)
Size 42×23×15(cm)

MKS-05P (TERRA-P)Personal Radiation Alarm Detector

Applicable occasions
 for civil construction evaluation of radioactive detection
 personal dose monitoring alarm
3. industrial X-ray, gamma nondestructive flaw detection, radiation detection
4. radiology site radiation detection
5. cobalt source, electron accelerator irradiation
6. radioactive radiation detection laboratory radiation detection
7. nuclear facilities in the surrounding environment radiation detection
8. soil surface contamination
9. radiation detection
10. ore, building materials, radioactive pollution of agricultural products



Functional features

1.three separate measurement channels rotate in the same LCD screen display
2.built-in gamma, beta sensitive GM counters
3.automatically adjust the measurement time interval and measurement range
4.sound indicator to measure each of the gamma and beta radiation event particles
5.dose rate sound alarm limit can be set
6.digital display, four battery indicator.
7.two AAA batteries
8.shockproof housing, compact design


 Specifications:


1.Gamma radiation dose equivalent:0.01μSv-999.9mSv
2.Beta-particles surface radiation density:10-100 000;
3.Gamma radiation:0.05~3.0; ±25%MeV

axial flow pump

Product Introduction


ZLB pumps are single stage vertical pump, the liquid flows along the shaft axis. For pumping water, sewage (or waste water), and minor corrosive liquids, transmission fluid temperature is generally no higher than 50 °C. This pump is a large flow and low lift pumps, for agricultural irrigation, salt factories, farming, water supply, drainage, sewage treatment, power transmission cycle of water, water or other hydraulic lift dock purposes, can be used for metallurgy, chemical industry (special requirements can be designed), the use of a wide range.

water pump

Product Introduction

Industrial and urban water supply, pressurization of water supply network, daily and fire water supply for constructions, central air conditioning system, cyclic pressurization for other cold and hot clean medium.


Main Parameter


Model 65-200


Flow m3/h 17.5 25 32.5


          l/s     4.86 6.94 9.03


Head m    52.7 50 45.5


Efficiency %49 58 59


Rotated speed r/min 3900


Motor power kw 7.5


Weight kg 107

oxygen filling pump

Product Introduction

It is mainly used for mining ambulance service was filling oxygen respirator, compression oxygen for oxygen tanks, and save for chemical, oil, medical, fire control and other relevant station fill oxygen when used. It is an oxygen filling equipment that step up oxygen pressure from source bottle to another gas bottle, let the oxygen pressure of this gas bottle achieve the needed pressure. It is used for pump oxygen, nitrogen and carbon dioxide from source gas bottle and fills in the gas bottle which is waiting for inflating.

rotary piston vacuum pump

Product Introduction


Rotary piston vacuum pump is suitable for air and other ordinary gases, with a gas ballast valve, witch could be applied to pump condensable gases (such as vapor). The pump should be equipped with appropriate accessories if the gas pumped has the following features, such as rich in oxygen, explosive, corrosive to ferrous metal and chemical reactive with the vacuum pump oil. This series of pumps could be operated in single unit or act as the pre-process pumping unit for the next high vacuum pumps, such as diffusion or roots pumps. It is widely used in the industries of vacuum coating, vacuum heat treatment, vacuum impregnation, vacuum smelting, vacuum metallurgy, vacuum drying, molecular distillation and altitude simulation testing.


Main Parameter



Pumping speed 9m3/min 150L/S ultimate pressure  1.3pa torr1x10-2 power 11kw inlet diameter100 mm  outlet  diameter 80mm

solar power submersible water pump

Product Introduction
It adopts lightning protection, water filling, permanent magnet, brushless DC, and non-sensor shielding motor, and MPPT (maximum power point tracking) driving device and has diving depth of 200m, and motor efficiency reaches over 90%.
Full-automatic operation, unmanned guarding, apply to photovoltaic and wind power direct power supply (storage battery power supply)

DC Electric Mini Motor for Electric Toy Car

Product Introduction


DC Brush Motor Designed for high volume applications Up to 10230 g-cm of Torque52 mm diameter Custom versions are available Rated Power: 8.8 to 254.9 (W)Rated voltage: 3.0 ~ 36.0 (V)Rated current: Can be determined according to the requirements of (A)Rated speed: 1000 to 25000 (rpm)Rated Torque: Available upon request to determine (NM)Dimensions: Outer diameter 42.2X66.0 long X-axis of the outer diameter of 5mm (mm)Product Certification: RoHS, Reach, ULScope: Cordless power tools; Model travel, household appliances and other efficiency: 30 to 85 (%)