dry and wet shotcrete machine with accessories

Chinacoal05
Specifications
1)Explosion-proofing motor
2)simple structured;
3)high-effective

Product Introduction

Dry and wet Shotcrete machine with accessories
cement guniting machine

 1.shotcrete machine widely used in coal mine roadway and high marshy mine,

construction,traffic tunnel and sprayed concrete construction work.


2.There are wet shotcrete machine, dry shotcrete machine, explosion proof shotcrete machine,

and spare parts.

Main Parameter



Item ZMPZ-5  
Output 5m3/h  
Max. convey distance Horizontal:200m   Vertical: 20m  
Suitable Mix Ratio (Cement/Sand) 1:3-5  
Water/cement ratio of concrete ≤0.4  
Max. Aggregate. Size 20mm  
Hose inner size 51mm  
Operating air pressure 0.4~0.6MPa  
Air consumption 7-8 m3/min  
Rotor diameter 438mm  
Motor power Y132m-6-5.5KW  
Voltages   380v as your requirements  
Overall dimension(mm) 1520x820x1280  
Whole weight 600kgs  
wheel Nylon wheel or Rubber wheel


Item HSP-5  
Output 5 m³/H  
Max. Convey dist Horizontal:30m   Vertical: 20m  
Concrete proportion 1:4-5C/A  
Water cement ratio ≤0.4  
Hose inner size Φ51m  
Max. Aggregate size 15mm  
Operating air pressure 0.3-0.6MPa  
Air consumption 10-15m³/min  
Spring rate level ≤10%  
liquid accelerator metering pump pneumatic  
liquid accelerator add ratio 0.3-0.7%  
main Electric motor power Y132m-6-5.5KW  
Voltages 380v as your requirement  
Overall dimension(mm) 1520X820X1280  
Whole weight 700kgs  
Wheel Nylon wheel or Rubber wheel

wet and dry type shotcrete machine for construction or mine

Chinacoal05
Specifications
1, Top quality
2. Go straight with rotor
3. Well compact and seal
4. We are factory with over 20 years experience
Product Introduction
1,Advantages:This  is a high-effective shotcrete machine,which is mainly used for dry-mix, damp-mix shotcreting and steel fiber reinforced shotcreting.
2,Non-adhesion going through rotor with new material chamber, completely eliminate bonding and blocking during operation so as to reduce clearance and maintenance period.
3,Four-point clamping device make it easy to adjust the press between sealing plate and rotor disk so as to no air and dust leak and prolong consumption parts life.,
4,Thin flow conveying method with vortex flow, so the spraying flow is even, continuous and steady, to improve the shocrete quality.

Main Parameter

Model PZ-5B (wet)  
Capacity 5m³/h  
Max. Conveying Distance horizontal200m,vertical20m  
Max. Aggregate Diameter 20mm  
Feeding Pipe Inner Diameter 50mm  
Working Pressure 0.4-0.6Mpa  
Air Consumption 7-8m³/min  
Rotor Diameter 438mm  
Motor Power 5.5kw  
Gauge Distance 600mm( or as customers)  
Voltage 380V or 660V or As customers  
Weight 800kg  
Overall Size 1600x700x1150mm  

PZ-3 Shotcrete Machine

Chinacoal05
Product Introduction
PZ model factory price dry shotcrete machine for sale :
Common use:
1. Gunite Swimming Pool Construction.
2. Soil Retention and Tetaining Walls.
3. Rockscaping.
4. Refractory Spraying.
5. Mine Support.
6. Tunnel Linings.
7. Concrete Repair.
8. Artificial Rocks and Caves.
9. Low-volume Refractory Spraying.
Shotcrete Machine features:
1,Advantages: This is a high-effective shotcrete machine,which is mainly used for dry-mix, damp-mix shotcreting and steel fiber reinforced shotcreting.
2,Non-adhesion going through rotor with new material chamber, completely eliminate bonding and blocking during operation so as to reduce clearance and maintenance period.
3,Four-point clamping device makes it easy to adjust the press between sealing plate and rotor disk so as to no air and dust leak and prolong consumption parts life.,
4,Thin flow conveying method with vortex flow, so the spraying flow is even, continuous and steady, which is useful to improve the shotcrete quality.
Main Parameter

Item PZ-3 PZ-5 PZ-7  
Output 3.5m3/h 5m3/h 7m3/h  
Max. convey dist Horizontal:200m
Vertical:20m Horizontal:200m
Vertical:20m Horizontal:200m
Vertical:20m  
Water cement ratio ≤0.4 ≤0.4 ≤0.4  
Max. Aggregate. size 20mm 20mm 20mm  
Hose inner size 38mm 51mm 64mm  
Operating air pressure 0.4~0.6MPa 0.4~0.6MPa 0.4~0.6MPa  
Air consumption 3-4 m3/min 7-8 m3/min 8-10 m3/min  
Rotor  diameter 350mm(150) 438mm 480mm  
Motor power Y112M-6-3KW Y132-6-5.5(KW) Y132-6-7.5KW  
Voltages 380v or as your requirement 380v or as your requirement 380v or as your requirement  
Overall dimension(mm) 1040X550X940 1280x700x1280 1500X700X1280  
Whole weight 260kgs 600kgs 700kgs  
wheel Nylon wheel ;Rubber wheel ;skid wheel ;Rail wheel

PZ-5 Dry Shotcrete Machine

Chinacoal05
Product Introduction
PZ model factory price dry shotcrete machine for sale :
Common use:
1. Gunite Swimming Pool Construction.
2. Soil Retention and Tetaining Walls.
3. Rockscaping.
4. Refractory Spraying.
5. Mine Support.
6. Tunnel Linings.
7. Concrete Repair.
8. Artificial Rocks and Caves.
9. Low-volume Refractory Spraying.
Shotcrete Machine features:
1,Advantages: This is a high-effective shotcrete machine,which is mainly used for dry-mix, damp-mix shotcreting and steel fiber reinforced shotcreting.
2,Non-adhesion going through rotor with new material chamber, completely eliminate bonding and blocking during operation so as to reduce clearance and maintenance period.
3,Four-point clamping device makes it easy to adjust the press between sealing plate and rotor disk so as to no air and dust leak and prolong consumption parts life.,
4,Thin flow conveying method with vortex flow, so the spraying flow is even, continuous and steady, which is useful to improve the shotcrete quality.
Main Parameter

Item PZ-3 PZ-5 PZ-7  
Output 3.5m3/h 5m3/h 7m3/h  
Max. convey dist Horizontal:200m
Vertical:20m Horizontal:200m
Vertical:20m Horizontal:200m
Vertical:20m  
Water cement ratio ≤0.4 ≤0.4 ≤0.4  
Max. Aggregate. size 20mm 20mm 20mm  
Hose inner size 38mm 51mm 64mm  
Operating air pressure 0.4~0.6MPa 0.4~0.6MPa 0.4~0.6MPa  
Air consumption 3-4 m3/min 7-8 m3/min 8-10 m3/min  
Rotor  diameter 350mm(150) 438mm 480mm  
Motor power Y112M-6-3KW Y132-6-5.5(KW) Y132-6-7.5KW  
Voltages 380v or as your requirement 380v or as your requirement 380v or as your requirement  
Overall dimension(mm) 1040X550X940 1280x700x1280 1500X700X1280  
Whole weight 260kgs 600kgs 700kgs  
wheel Nylon wheel ;Rubber wheel ;skid wheel ;Rail wheel

PZ-5B Explosion-proof Shotcrete Machine

Chinacoal05
Product Introduction
1,Advantages:This  is a high-effective shotcrete machine,which is mainly used for dry-mix, damp-mix shotcreting and steel fiber reinforced shotcreting.
2,Nonadhesion going through rotor with new material chamber, completely eliminate
bonding and blocking during operation so as to reduce clearance and maintenance
period.
3,Fourpoint clamping device makes it easy to adjust the press between sealing plate and
rotor disk so as to gurantee no air and dust leak and prolong consumption parts life.,
4,Thin flow conveying method with vortex flow, so the spraying flow is even, continuous
and steady, which is useful to improve the shocrete quality.
Main Parameter

Item
  PZ-5B PZ-7B  
Output 5m3/h 7m3/h  
Max. convey dist Horizontal:200m Vertical: 20m Horizontal:200m Vertical: 20m  
Water cement ratio ≤0.4 ≤0.4  
Max. Aggregate. size 20mm 20mm  
Hose inner size 51mm 64mm  
Operating air pressure 0.4~0.6MPa 0.4~0.6MPa  
Air consumption 7-8 m3/min 8-10 m3/min  
Rotor  diameter 438mm 480mm  
Motor power Y132m-6-5.5(KW) Y160m-6-7.5KW  
Voltages 380v or as your requirement 380v or as your requirement  
Overall dimension(mm) 1600X700X1150 1600X700X1150  
Whole weight 800kgs 900kgs

NC4 Semi-automatic Tray & Cup Sealers

Chinacoal05

Machine adopts IC computer controller with structure of SS and Al alloy Its High quality seal with ingenious appearance are widely welcomed on market . 

 It suits for seal cups, plastic bowls, paper cans and paper cylinder like instant noodles bowl, potato chips can, milk cup, ketchup cup etc for any kinds shape plastic and paper materials.

We can customize the nonstandard cup seal machine based on customer products. 

Summarize:

This sealer is suitable for shops to seal noodle,wheaten food,fruit jelly,pudding,bean milk,hot & cold food ,mild tea etc.It adopts IC computer controlling switch for which is easy to be used.The sealing is automatically finished after putting on the case or cup.Its casing is made of stainless steel,in line with the sanitary requirement.

Specification

Model	NC4
Operating mode	Manual/Semi-auto
Voltage	110V 60HZ/220V 50HZ
Power	450W
Capacity	800cups/Hour
Weight	26Kgs
Dimension (mm)	300×260×650

KL-400 Manual Cup Sealer and Cutter

Chinacoal05

Product Introduction

Specifications

1. Auto cup tea sealing machinery
2. 12 times each min.
3. Temperature control: 0-22C
4. for plastic square cups

Manual Sealing Machine KL-400   

This model is suitable for shops to seal noodle,wheaten food,fruit jelly,pudding,bean milk,hot & cold food ,mild tea etc.

Main Parameter

Main Technical Data:

Model	KL-400
Production ability	12 cups/min
Power	0.9 kw
Voltage	220v 50hz
Temperature control	0 - 22C
Size	650*500*750mm
Weight	55kg

KIS-1 Table Type Semi Automatic Tray/cup Sealing Machine with gas filling and expiration date printer

Chinacoal05

Product Introduction

     

1 change mould and sealing device quickly.

2 Japan Omeron programmable logic PLC controller.Intelligent Digital Display Temperature Control System.Omron Time Reply .TAIWAN AIRTAC cylinder, equipment stable and durable.

3 Small footprint,automatic detection cups (boxs).when the machine in danger operation.will automatically reset.shade-guide for the design.gas filling,sealing,cutting film,recycling.

4 The machine made of stainless stell and aluminum alloy,Comply with food hygiene requirements

Main Parameter

TECHNICAL SPECIFICATIONS  

Model         KIS-1                                 KIS-4

Voltage       AC220V/650W                  AC22OV/2KW

Output         400 cups/ hour                   1800cups/hour

Tempt          0-300'c                                   0-300'c                                 

weight                 60kg                                                     100kg

Dimension    750*480*650mm                         900*1000*1500mm

OSD-812 Semi-automatic Box Sealing Machine By Hot Melt Adhesive

Chinacoal05

Product Introduction

Hot melt adhesive semi-automatic box sealing machine is China Coal own research and development, continuous improvement, innovation sealed box one of the series, this product is suitable for food, medicine, paper towels, toys, electronics packaging industry, with environmental protection, security, and efficient advantages. Is the first choice of today's packaging industry.

 Products have now produced our third generation product, be modified in the previous two generations of products 

Features:

a.the whole selection meet the requirements of environmental protection, food-grade standards to deal with the whole appearance of a large area of  stainless steel equipment components;

b. the transition is convenient, fast. The new adjustment to the symmetric hand wheel adjustment, reduce the difficulty of transfer machines;

c. fully enclosed structure, the appearance of simple fashion;

d.The key components of all to switch to imported components

Main Parameter

Model	OSD-812
Machine size	1440mm (length) x 850mm (width) x 1500mm (high)
power consumption	AC220V,50HZ 2.4KW;
the temperature rise limit	not more than 230 ° C
the gas source	0.33mpa to 0.4Mpa appropriate
the gas source consumption	approximately 450L / h (normal operation)
Work capacity	40-60 / min (depending on operator proficiency)
Suit for Box	100~290mm (L) x 70~150mm (width) x 45~120mm (H)

AS523 Semi-automatic Carton Sealer with CE

Chinacoal05

Product Introduction

AS523 semi automatic carton sealer with CE :

a. adopts instant adhesive tapes for sealing the carton . 

b. Efficient, Economic, Easy to adjust.

c. Left & right conveying. Finish the up & down sealing at one time.

d. can adopt lettering tape, improving the appearance of packing

e. Right and Left driving make sure the heavy carton move.

f. Belt tension & tape tension can be adjust easily . 

g. Can be applied in sealing hard and soft carton  .

Main Parameter

Model	AS523
Conveyor speed	20m/min
Max package size	W500XH580mm
Min package size	W100XH80mm
Width tape	36mm,48mm,50mm,60mm
Voltage	110/220/240V,50/60Hz
Power	0.18KVA
Machine size	1740x850x1330mm
Machine weight	160kg

long life magnetic bearings with high quality

chinacoal05

Product Introduction

Bearings mainly take radial load as well as take moderate axial load with less coefficient of friction ,

high limiting speed, large size range and variations of structure, they are suitable for precision instruments ,low noise motor, automobile ,motorcycles, and other common machinery ,as a widely used type of bearings in ,machinery industrial.

Main Parameter

Bearing No	d(mm)	D(mm)	B(mm)	Bearing No	d(mm)	D(mm)	B(mm)
618/1-------------618/9-2z
61800	10	19	5	61820	100	125	13
61801	12	21	5	61821	105	130	13
61802	15	24	5	61822	110	140	16
61803	17	26	5	61824	120	150	16
61804	20	32	7	61828	140	175	18
61805	25	37	7	61832	160	200	20
61806	30	42	7	61834	170	215	22
61807	35	47	7	61838	190	240	24
61808	40	52	7	61840	200	250	24
61809	45	58	7	61844	200	250	24
61810	50	65	7	61852	260	320	28
	55	72	9

YBT Mining Explosion-proof Axial Fan With MA

 chinacoal05

· Application:  Best choice ventilation fan for under mining coal, deep tunnel/  metal mining/ engineering tunnel

· Function:  far distance ventilation,  big power ventilation, low noisy, high efficiency, energy-saving,  various style available

· Temperature range:-20°C~+40°C

FBD Series explosion-proof Axial Fan for Tunnel and Coal Mine  Feature:
1. The product is composed of explosion-proof motor, vanes, air duct and others;

2. It's in low noise, low consumption and perfect performance;

3. Besides being used for ventilation and exhausting, it also can be installed in series to improve the pressure in pipe;

4. The enclosure material can be armor plate or fiber floss reinforced plastic;

5. Wiring with cable.

YBT Series Explosion Proof Ventilation Fan (AC Blower) Keyword:AC blower

 chinacoal05

Application:  Underground mining, tunnel, metal mining,  chemical mining, industrial s

Function:  explosion-proof, built-in muffler, extraction local ventilation fan

Temperature range:-20°C~+40°C

Match Motor: YB series II  Y motor, 380v/660v motor, independent motor but large air capacity

MOQ: 1 PCS

Lead time: 10 days

Model	YBT-2.2	YBT-5.5	YBT-7.5	YBT-11	YBT-18.5	YBT-22	YBT-30
Full pressure (Pa)	960-380	1700-800	1900-900	2250-800	2400-520	3200-680	3500-800
Air capacity (m³min)	55-101	90-180	100-210	130-240	195-300	240-370	250-800
Efficiency (%)	76	76	80	80	80	80.0	80
dB(A) Level	87	89	89	91	95	95	95
Diameter (mm)	315	400	500	560	600	600	630
Power (KW)	2.2	5.5	7.5	11	18.5	22	30